Welcome to HeartPep

For laboratory research.

Our catalogues are intended for research purchasers. Products are not for human or veterinary use.

We remember this acknowledgement for 30 days on this device.

US documentation

Lab results & certificates.

Search reported measurements and original documents by product, lot or report number. See how to match a lot number.

45 latest supplier reports

Latest available reports from our US supplier for each sample specification and test panel, newest first. Printed sample labels are retained where the wording differs. These reports have not been matched to a lot allocated to a HeartPep order.

Showing related supplier reports for TB-500. Compare the exact quantity, format and lot in the document.

5 of 45 supplier reference reports

Supplier sample documents, not confirmed HeartPep shipment lots
Sample / lotReported resultsReport detailsOriginal document
BPC-157 / TB-500 10 mg totalFormat: not stated in reportPrinted sample: BPC/TB 500 10MGLot KIZN072426Purity, content and additional panels
Reported purity
99.5%
Measured content
BPC-157: 4.96 mg; TB-500: 5.03 mg

RP-HPLC purity; HPLC potency, LC-MS identity and the additional sample tests stated in the report. Additional panels are sample-specific; details and limits remain in the original PDF.

Additional tests & notes

Identity Verification (LC-MS): BPC-157 + TB-500; pH (Probe): 6.38 (specification 5.0 – 8.0); Water Activity (Probe): .2687 aw; Endotoxin (LAL): Pass (specification ≤ 0.05 EU/mg); Sterility (USP <71>): Pass (specification No Growth); Total Yeast & Mold (USP <61>/<62>): Pass (specification Within Limits); Residual-solvent panel: listed results ND; heavy-metal panel: arsenic, cadmium, lead and mercury ND. Both panels marked PASS

Filename says5-5mg, actual sample labelBPC/TB50010MG; preserve total label, inspect component assay before declaring per-component amount.

ND means not detected under the stated method limits, not zero concentration. Individual solvent and metal results/LOD/LOQ/action limits are reported in µg/g. These panels do not establish human-use suitability.

Component amounts follow the component order printed in the original report. The single RP-HPLC purity value is reported for the tested blend; no separate component-purity minimum is stated.

Optiq Health Labs, LLC0325.OPT.260729-R1Certificate of analysisIssued/report date: Named client: Wholesale Peptide Supply

The PDF sample label gives a total of 10 mg. The supplier filename says 5/5 mg; confirm component amounts before relying on that specification.

Open full report ↗ for BPC/TB 500 10MG, PDF, opens in a new tab
BPC-157 / TB-500 20 mg totalFormat: not stated in reportPrinted sample: BPC/TB500 20MGLot KIZN072426Purity, content and additional panels
Reported purity
99.16%
Measured content
18.99 mg total

RP-HPLC purity; HPLC potency, LC-MS identity and the additional sample tests stated in the report. Additional panels are sample-specific; details and limits remain in the original PDF.

Additional tests & notes

Multitest panel; pH 5.67; identity LC-MS identified; endotoxin LAL <=0.05 EU/mg Pass; sterility USP71 No Growth Pass; total yeast and mold USP61/62 Within Limits Pass; residual solvents GC-MS Pass; heavy metals ICP-OES Within Limits Pass.

Filename identifies 10/10mg components. Printed report title says 20mg and measured potency is total; component amounts are not established.

Optiq Health Labs LLC0311.OPT.260729-R1Certificate of analysisIssued date: Named client: Wholesale Peptide SupplyOpen full report ↗ for BPC/TB500 20MG, PDF, opens in a new tab
GLOW 70 mg totalFormat: not stated in reportPrinted sample: GLOW 70MGLot KIZN072426Purity, content and additional panels
Reported purity
99.91%
Measured content
GHK-Cu: 49.87 mg; BPC-157: 9.88 mg; TB-500: 9.32 mg

RP-HPLC purity; HPLC potency, LC-MS identity and the additional sample tests stated in the report. Additional panels are sample-specific; details and limits remain in the original PDF.

Additional tests & notes

Identity Verification (LC-MS): GHK-Cu + BPC-157 + TB-500; pH (Probe): 6.21 (specification 5.0 – 8.0); Water Activity (Probe): 0.4010 aw; Endotoxin (LAL): Pass (specification ≤ 0.05 EU/mg); Sterility (USP <71>): Pass (specification No Growth); Total Yeast & Mold (USP <61>/<62>): Pass (specification Within Limits); Residual-solvent panel: listed results ND; heavy-metal panel: arsenic, cadmium, lead and mercury ND. Both panels marked PASS

ND means not detected under the stated method limits, not zero concentration. Individual solvent and metal results/LOD/LOQ/action limits are reported in µg/g. These panels do not establish human-use suitability.

Component amounts follow the component order printed in the original report. The single RP-HPLC purity value is reported for the tested blend; no separate component-purity minimum is stated.

Optiq Health Labs, LLC0324.OPT.260729-R1Certificate of analysisIssued/report date: Named client: Wholesale Peptide SupplyOpen full report ↗ for GLOW 70MG, PDF, opens in a new tab
TB-500 10 mgFormat: not stated in reportLot KIZN072426Purity, content and additional panels
Reported purity
99.06%
Measured content
9.55 mg

RP-HPLC purity; HPLC potency, LC-MS identity and the additional sample tests stated in the report. Additional panels are sample-specific; details and limits remain in the original PDF.

Additional tests & notes

Identity Verification (LC-MS): TB-500; pH (Probe): 5.23 (specification 5.0 – 8.0); Water Activity (Probe): 0.3752 aw; Endotoxin (LAL): Pass (specification ≤ 0.05 EU/mg); Sterility (USP <71>): Pass (specification No Growth); Total Yeast & Mold (USP <61>/<62>): Pass (specification Within Limits); Residual-solvent panel: listed results ND; heavy-metal panel: arsenic, cadmium, lead and mercury ND. Both panels marked PASS

ND means not detected under the stated method limits, not zero concentration. Individual solvent and metal results/LOD/LOQ/action limits are reported in µg/g. These panels do not establish human-use suitability.

Optiq Health Labs, LLC0320.OPT.260729-R1Certificate of analysisIssued/report date: Named client: Wholesale Peptide SupplyOpen full report ↗ for TB-500 10MG, PDF, opens in a new tab
TB-500 (strength not stated)Format: not stated in reportPrinted sample: TB-500Lot TB1210Microbiology and endotoxin
Reported purity
Not reported
Measured content
Not reported

Microbiology only. No chemical identity, purity, assay or labelled quantity. ScanRDI entry states No Method Suitability on file.

Additional tests & notes

ScanRDI sterility Pass; USP 85 endotoxin <2 EU/mL, limit 875 EU/mL, Pass

No Method Suitability on file.

No exact strength, purity or content established.

Filename lot is TB12110, but printed lot is TB1210; mismatch retained.

Eagle Analytical Services IncETX-260402-0209Microbiology laboratory reportPrint date: Named client: FAWC

The report does not establish an exact labelled quantity or formulation.

Open full report ↗ for TB-500, PDF, opens in a new tab
How to read these results

Purity and measured content are different results. A high purity percentage does not establish the amount in a vial, and an endotoxin result is not a sterility result. Values and units above are transcribed from the named laboratory report; unreported measurements stay marked as not reported.

A supplier report applies when the exact compound, quantity, format and supplied lot match. A vial report does not verify a nasal formulation or another strength. Read the complete original for its methods, sample identity, limits and scope.

These links preserve the complete originals and laboratory/client details so the report can be checked. They do not constitute an independent HeartPep retest or confirmation of the issuer’s authenticity.

Order-lot certificates

Reports matched to the exact regional product and a supplied lot are kept separately from general supplier references.

No order-lot certificates published yet. Open the batch finder

0 published records

Reports will appear here as they are published.

No published report is currently shown for TB-500 10 mg.

Ask about batch documentation →
What does a certificate establish?

A report applies to its named product and batch. A published link is not an independent HeartPep retest or a guarantee of sterility or suitability for human use. Match it to the lot proposed for supply.